Home > Products > DC E-load series > IT8800 High Power DC Electronic Load
 86-25-52415098    www.itechate.com
IT8800 High Power DC Electronic Load

IT8800 series has wide power range 150W~10KW, voltage and cureent measurement speed up to 50KHZ, resolution up to 0.1mV/0.01mA, adjustable measurement current rising speed 0.001A/us~2.5A/us, built-in RS232/GBIP/USB interface. IT8800 series has wide application fields because of its high perfromance products, it has been applied to LED lighting, aerospace, automotive electronics and other fields.      

  • Features
  • Functions & Advantages
  • Options & Accessories
  • Document library
  • Features

    CV/CC/CR/CW mode
    Remote sense
    Measurement resolution:0.1mv,0.01ma
    Dynamic mode: up to 25 KHz
    Adjustable current rising slope: 0.001A/us~2.5A/us·
    Measurement speed: up to 50KHz ·
    Dynamic test, short-circuit test function
    Rotary knob, making the operation more easier
    CR-LED test
    OCP / OVP / CPP / OTP/ Reverse polarity protection
    100 groups memory capacity
    Power off memory function
    External analog control
    Support VISA/USBTMC/SCPI communication protocol
    Built-in RS232/USB/GPIB communication interface
    Software monitoring via PC

    Dynamic mode up to 25KHz

    Dynamic mode operation allows the electronic load to be switched between the two setting parameters according to the setting rules. Dynamic mode can be used to test the dynamic nature of the power supply, e.g. when the computer disk drive is running or stopped, the dynamic load mode can simulate change of operating current.

    Adjustable rising/falling speed of current

    The user can use IT8800 test the voltage rising / falling time. Enter the measure menu under config, set two voltage points. And then turn on the display on timer function, the rising / falling time will be displayed on the screen when finished.

    This test is improtant for switching power supply testing, fuse testing.


  • Dynamic mode: up to 25KHz

    The transient test allows switching between two different load values. The function is used to test dynamic characteristic of power supply.

    test and measurement

    Adjustable rising/falling speed of current

    List mode allows you to generate a complex current sequence. Moreover, the mode change can be synchronized with an internal or external signal, to accomplish dynamic and precise test.A list file includes following parameters: file name, step counts (range 2-84), time width of single step (0.00002s~3600s),step value and slope. The LIST function can make many kinds of complex sequences, to meet complicated test requirements. The slope range is 0.0001A/us~2.5A/us.

    DC Electronic Load

  • Options & Accessories Instruction Images
    AC power cord
    CD User's manual,programming manual
    USB cable
    IT-E151(optioanl) rack mount kit suitable for less than 25...
    IT-E301/30A red&black testing wires 200cmx2
    IT-E301/60A red&black testing wires 150cmx2
    IT-E301/120A red&black testing wires 200cmx2
    IT-E301/240A red&black testing wires 200cmx2
    IT-E301/360A red&black testing wires 200cmx2
360°Onlooking productReset